adb devices<\/strong>\u00a0command again and your device\u2019s serial number should appear in the command window.<\/li>\n<\/ul>\nStep 3: <\/b>Boot your Nothing Phone 1 into Fastboot Mode<\/h4>\n
Fastboot can be used to send commands to the bootloader. It can only establish a connection with your phone and accept commands while it is in Fastboot Mode<\/strong>. There are several ways to get the Nothing Phone 1 into fastboot mode. You may use it by pressing the physical keys or by sending an ADB command from your computer.<\/p>\n\n- Now, reboot to the bootloader<\/strong> menu.<\/li>\n
- You can either do this by powering off the phone and holding the power and volume down buttons while booting up.<\/li>\n
- Or you can boot your Nothing phone into Fastboot Mode<\/strong> by entering the following ADB command.\n
adb reboot bootloader<\/code><\/pre>\n<\/li>\n<\/ol>\nStep 4: Unlock Bootloader of Nothing Phone 1<\/b><\/h4>\n
Now that your device is in bootloader mode, you’ll need to use the fastboot command to communicate with your device.<\/p>\n
\n- \n
\n- Now type in the below command to verify the Fastboot Connection.\n
fastboot devices<\/pre>\n<\/li>\n
- If you see a unique series of alphanumeric characters, it means the device has successfully booted to Fastboot.<\/li>\n
- Finally, type in the below command to unlock Nothing Phone 1\u2019s bootloader.\n
fastboot flashing unlock<\/pre>\n<\/li>\n
- If you need to flash low-level firmware partitions, such as bootloader images, you will need to run another command after that. (Optional step).\n
fastboot flashing unlock_critical<\/pre>\n<\/li>\n
- When you perform the command, your phone should display a confirmation prompt on the screen.\u00a0Simply press the Volume keys to shift the selection to UNLOCK THE BOOTLOADER<\/strong> and then hit the Power key to confirm.<\/li>\n
- The device’s bootloader will be unlocked. On your screen, you will see the unlocked<\/strong> text.<\/li>\n
- Now, reboot the phone using the option in the bootloader menu or run the following command to reboot your phone.\n
fastboot reboot<\/pre>\n<\/li>\n
- You have successfully unlocked the bootloader of your Nothing Phone 1. Now, you can proceed to root your phone.<\/li>\n<\/ol>\n<\/li>\n<\/ol>\n
Wrapping Up: Unlock Nothing Phone 1 Bootloader<\/h3>\n
These are the instructions for unlocking the bootloader on Nothing Phone 1. Remember that the initial startup will take some time; this is entirely normal. Furthermore, you will need to reconfigure your device by entering it into your Google account. Later, you may install a custom recovery, root your phone or install a custom ROM on it.<\/p>\n